Glass tempering furnace is also known as glass tempering equipment, glass tempering unit, tempering furnace, tempering equipment, tempering unit, etc. The glass tempering furnace uses physical or chemical methods to form a compressive stress layer on the surface of the glass and a tensile stress layer inside .
When the glass is subjected to external force, the compressive stress layer can offset part of the tensile stress to avoid glass breakage, thereby achieving the goal of increasing the strength of the glass.
In the actual production process, during the tempering process of the original glass, due to the unreasonable setting of the tempering furnace parameters, the uneven quality of the original glass, etc., it is inevitable that the glass will appear bending, cracking, and impact resistance during the process of being out of the furnace. Low, scratches and more! Today, the editor will take you to systematically understand the common defects in the production process of tempered glass and the corresponding solutions!
1.Glass Cracking Phenomenon
2.The glass bends upwards (the opposite is done for bending downwards)
3. The glass appears wavy and bent
4. Glass appears spherical phenomenon
5.Different degrees of curvature on the left and right sides of the glass
6.Local fragments are uneven or too large
